22
Table of Contents
Specifying the DME Connected to the Switcher...............................1076
Enabling the FM Data Port of the Switcher ......................................1076
Setting the Signal Format (Format Menu).............................................1078
Setting the Signal Format ..................................................................1078
Switching the Input Reference Signal for HD System......................1080
Setting Conversion Formats ..............................................................1081
Setting the Screen Aspect Ratio (Format Menu)...................................1084
Selecting the State After Powering On (Start Up Menu)......................1085
Saving and Recalling Setup Data ......................................................1086
Selecting the State at Start-up ...........................................................1087
Saving User-Defined Settings ...........................................................1088
Setting Automatic Loading of Register Data at Power On (Autoload
Function) ................................................................................1088
Reset and Initialization (Initialize Menu)...............................................1090
Installation and Device Setup (Install/Unit Config Menu) ...................1091
Installing Software ............................................................................1091
Making Settings Required to Use the Software ................................1093
Adding User Texture Patterns ...........................................................1096
Switching the Color Correction Function .........................................1104
Inverting the Field Polarity of Frame Memory Images on the System
Level.......................................................................................1105
Allowing MVS-8000A/MVS-8000G Files To Be Used on the MVS-
8000........................................................................................1106
Saving a Frame Memory Clip With Ancillary Data..........................1106
System Maintenance (Maintenance Menu)............................................1108
Setting the Date and Time .................................................................1108
Using a Memory Card .......................................................................1109
Carrying Out the Primary Setting......................................................1110
Reloading a USB Driver....................................................................1110
Initializing the Hard Disk..................................................................1110
Locking the Setup Menu Settings .....................................................1111
Locking File Loading Operations......................................................1114
Chapter 19 Control Panel Setup (Panel)
Overall Control Panel Settings (Config Menu)......................................1118
Panel Setup ........................................................................................1118
Interchanging the Bank Order or Disabling Operation .....................1119
Assigning Two M/E Banks to One M/E Bank..................................1120
To Next Page
Loading...
