Chapter 7 Frame Memory
403
Still Image Operations
4
Turn the knob to select the register number in the user region.
Notes
To search for an empty register in the user region, use the numeric keypad
control block or the Multifunction Flexi Pad control block (see step 3 of
“Recalling a Register” in Chapter 13 (Volume 2)).
5
Use the arrow keys or turn the knobs to scroll the thumbnail display of the
files.
6
Select the thumbnail of the files to be used for the keyframe.
7
If necessary, turn the knob to check the animation effect in the thumbnail
display.
8
Using the region selection buttons in the numeric keypad control block or
the Multifunction Flexi Pad control block, select one of the regions (User1
to User8) to which the frame memory output signals have been assigned.
9
Carry out either of the following.
• To clear the effect register selected in step 4, and create a new effect:
press [Create Key Frame].
• To add to the end of the effect register selected in step 4, press [Append
Key Frame].
A confirmation message for creating the effect appears.
If there is an inappropriate condition for creating the effect, an error
message appears.
For details of error messages, see “Error Messages” in the Appendix
(Volume 3).
10
Press [OK].
Knob Parameter Adjustment Setting values
5 Register Effect register number 1 to 99
Knob Parameter Adjustment Setting values
1 Scroll Thumbnail display
scrolling
1 and upwards
Knob Parameter Adjustment Setting values
3 Viewer Animate thumbnail display
of files
00:00:00 and upwards
To Next Page
Loading...
