Chapter 7 Frame Memory
414
Frame Memory Clip Operations
2
With [Pair] off, press the operation target selection button, to select the
operation target.
3
In the folder selection area, select the folder containing the clip to be
recorded.
4
In the <Record Enable> group, select the clip type.
• To record a normal clip, press [Clip].
• To record an extended clip, press [Ext Clip].
5
To set the clip name, press [Name].
A keyboard window appears.
6
Enter the clip name, and press Enter.
7
To start recording, press [Record Start].
8
To end recording, press [Record Stop].
Frame memory
selection area
Operation target
selection buttons
Pair selection
buttons
Folder selection
area
To Next Page