Chapter 11 DME Operations
663
DME Special Effect Operations
2
Set the following parameters, according to the selected mode.
• When H&V is selected
Before modulation
Size not modulated.
1 and 2 are same size.
Create waves by reducing 1
and expanding 2 the image.
Parameter group [1/2]
Knob Parameter Adjustment Setting values
1 Amp H Amplitude of waves in horizontal
direction
0.00 to 100.00
2 Freq H Frequency of waves in horizontal
direction
0.00 to 100.00
3
Offset H
a)
Horizontal direction in which to
offset wave phase and amount of
movement
–16.00 to +16.00
c)
–64.00 to +64.00
d)
4
Speed H
b)
Horizontal direction and speed of
waves
–100.00 to +100.00
5 Slant Slant of waves –8.000 to +8.000
Parameter group [2/2]
Knob Parameter Adjustment Setting values
1 Amp V Amplitude of waves in vertical
direction
0.00 to 100.00
2 Freq V Frequency of waves in vertical
direction
0.00 to 100.00
To Next Page
Loading...
