Sony MVS-8000 - Page 678

Chapter 11 DME Operations
678
DME Special Effect Operations
To set the partition position
1 Press [Position], turning it on.
2 Set the following parameters.
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
Mirror settings
You can choose to reflect in the directions left to right, right to left, bottom to
top, top to bottom, or any combination of directions. You can also set the
position of the border between original and reflections.
2 Random H Degree of randomness in distance
moved by blocks in horizontal
direction
0.00 to 100.00
3 Skew H Degree of skew in horizontal
direction
0.00 to 100.00
4 Width H Horizontal width of partition 0.00 to 100.00
5 Angle Angle of partition line –8.000 to +8.000
Parameter group [1/2]
Knob Parameter Adjustment Setting values
Parameter group [2/2]
Knob Parameter Adjustment Setting values
1 Transition V Degree of transition in vertical
direction
–100.00 to +100.000
2 Random V Degree of randomness in distance
moved by blocks in vertical
direction
0.00 to 100.00
3 Skew V Degree of skew in vertical direction 0.00 to 100.00
4 Width V Vertical width of partition 0.00 to 100.00
5 Angle Angle of partition line –8.000 to +8.000
Knob Parameter Adjustment Setting values
1 H Horizontal partition position
–5.000 to +5.000
a)
–20.000 to +20.000
b)
2 V Vertical partition position
–5.000 to +5.000
a)
–20.000 to +20.000
b)