Chapter 13 Keyframe Effects
809
Keyframes
DME Global Effect menu
Types of path
Path types for Curve
There are five types, as follows.
OFF: Executing the effect causes no change.
Step: There is no interpolation between keyframes, so that the effect
parameters are updated each time a keyframe is passed.
Linear: Linear interpolation between keyframes, resulting in constant
speed movement.
S-Curve: The rate of change accelerates and decelerates before and
after a keyframe, so that the rate of change is maximum midway
between two keyframes.
Spline: The effect follows a smooth curved path from each keyframe to
the next.
Path types for Hue
There are four types, as follows.
CW: The hue changes in a clockwise direction as seen on a
Vectorscope.
CCW: The hue changes in a counterclockwise direction as seen on a
Vectorscope.
Short: The hue changes in whichever of the clockwise and
counterclockwise directions is shorter.
Long: The hue changes in whichever of the clockwise and
counterclockwise directions is longer.
Path types for Xpt
There are two types, as follows.
Xpt Hold off: When replaying a keyframe, change the inputs to the
settings saved in memory.
Xpt Hold on: When replaying a keyframe, do not change the inputs.
Item Paths that can be set
Global Effect All Overall path settings for DME global effect
items are made simultaneously.
Combine Path for combiner
Shadow Path for shadow
Brick Path for brick
To Next Page
Loading...
