Chapter 13 Keyframe Effects
821
Recalling a Register
Recalling a register from the Multifunction Flexi Pad control
block
1
Press the [EFF] button, turning it on.
2
Press the button corresponding to the region you want to select, turning it
on.
You can also press more than one button.
[M/E 1], [M/E 2], [M/E 3], [P/P]: These select the corresponding M/E-1,
M/E-2, M/E-3, and PGM/PST regions.
[USER 1] to [USER 8]: These select the User regions.
[DME 1] to [DME 8]: These select the DME channels.
[PBUS]: This selects P-Bus.
[GPI]: This selects GPI.
[MCRO]: This selects Macro.
[DEV 1] to [DEV 12]: This selects device.
[ALL]: This selects all valid regions.
[MSTR]: This selects the master timeline (see “Creating and Saving a
Master Timeline Using the Buttons in the Multifunction Flexi Pad
Control Block” (page 861)).
EFF button
Alphanumeric display
Region selection buttons
Memory recall section
To Next Page
Loading...
