Chapter 13 Keyframe Effects
856
Executing Effects
2
Press the following buttons to execute the effect.
[REWIND] button: Press this button to move to the first keyframe of the
currently recalled effect.
[RUN] button: Press this button to run the currently recalled effect.
Setting the execution mode
Press the [EXEC MODE] button to switch the memory recall section to the
execution mode setting mode, and set the execution mode with the
following buttons, then execute the effect.
[EFF LOOP] button: Execute the effect repeatedly.
[STOP NEXT] button: Execute the effect and stop at the next keyframe.
[NORM] button: Execute the effect from the first keyframe to the last
keyframe.
[NORM/REV] button: Execute the effect as far as the first or last
keyframe, then reverse direction.
[REV] button: Execute the effect from the last keyframe to the first
keyframe.
To Next Page
Loading...
