Squid Ink CoPilot 500 - Mounting Hardware Parts

Parts List 131
2005995 Rev O – 210712
Floor Stand Assemblies
Part Number Description
2004940
1 short Arm (14"), Brackets for downshoot, Ink Reservoir and Controller
* Must order 2004918 to accommodate twist applications
2004941
2 short Arms (14") Brackets for downshoot, Ink Reservoirs and Controller
* Must order 2004918 to accommodate twist applications
2004942
1 short Arm (14"), 1 Stitch Plate Bracket set, Brackets for two Ink Reservoirs and
one Controller (for one CoPilot 500 with 2 Printheads total)
2004946
2 short Arms (14"), Controller Mounting L-Bracket, black Mounting Plates for
CoPilot 500 Printheads, and Ink System Mounting Brackets
2004947
2 long Arms (30"), Controller Mounting L-Bracket, black Mounting Plates for
CoPilot 500 Printheads, and Ink System Mounting Brackets
2004951
2 Arms, 2 Stitch Plate Bracket sets for four Printheads, four Ink Reservoir and
two Controllers (for two CoPilot 500 Controllers with 4 Printheads total)
2004956
1 short Arm (14"), Controller Mounting L-Bracket, black Mounting Plate for
CoPilot 500 Printhead, and Ink System Mounting Bracket
2004957
1 long Arm (30"), Controller Mounting L-Bracket, black Mounting Plate for
CoPilot 500 Printhead, and Ink System Mounting Bracket
2005941
1 short Arm (14"), black Baseplate to mount Controller, Printhead and Ink
System (2004920), and Printhead Mounting Post (2004918)