28 Installation and Setup
2005995 Rev O – 210712
Mounting the Controller
The Controller is attached to the Mounting Bracket by inserting the two supplied Mounting
Screws into the two M6 mounting holes located on the bottom of the Controller.
VIDEO: Mounting the Controller
To see a video of this procedure, click this link:
https://youtu.be/zSjTfhCmU8M?t=49
Or scan the QR code at right using the camera app on your mobile
device.
View Time: 0:49 – 2:38
Controller
Supplied
Mounting
Screws
Attaching the Controller
To Next Page
Loading...
