38 Installation and Setup
2005995 Rev O – 210712
Rotating or Tilting the Printhead
The Printhead can be mounted in a rotated or tilted orientation. This is useful when printing
on an incline Conveyor or vertical Web.
The Printhead can be rotated 90° clockwise or counter-clockwise (sideshooter position)
when viewed from behind the Printhead.
The Printhead can be tilted from 0° (straightshooter position) to 90° pointing down
(downshooter position). The printer will not print pointing up.
90°
90°
Sideshooter Position
Downshooter Position
To Next Page
Loading...
