88 Software Interface
2005995 Rev O – 210712
Spit Delay (Milliseconds)
The time in milliseconds between when the message stops printing and the spit begins.
Spit Timeout (Seconds)
The time in seconds that the Printer continues to spit after the last trigger. This is
important if the Printer is idle for a long period such as overnight or after a long break.
The Printhead will continue to spit throughout the idle period to reduce the likelihood of
ink drying and clogging the system.
If using solvent-based inks, contact your Squid Ink distributor for guidance on the
appropriate Spit Mode settings to use.
Spit Settings Screen
To Next Page
Loading...
