Stratasys Objet1000 Plus - Terms Used in this Guide

Objet1000 Plus User Guide 1 About This Guide
DOC-06810 Rev.B 1-3
Terms Used in This Guide
Build tray
In Objet Studio software:Thesurfacedisplayedonthescreen
thatrepresentstheactualbuildtrayintheprinter.
In the printer:Thesurfaceuponwhichmodelsareproduced.
Cleaning fluid Cleanserforflushingmaterialfeedtubesandtheprintingblock,
usedtocompletelyremoveModelandSupportmaterialfrom
thesystembeforeloadinganothertypeofmaterialinthe
printerandbeforelong-termshutdown.Thecleaningfluidis
suppliedinmaterialcontainers.
Client/user workstation Theworkstationonwhichsoftwareisinstalledforpreparing
buildtraysforproductiononPolyJetprinters.(Thereisnolimit
tothenumberofclientworkstations.)
Connex™ Thetechnologyofprintingmodelsbyjettingmultiplematerials
simultaneouslyfromtheprintheads.Thistechnologyenables
Objet1000PlusprinterstoprintinDigitalMaterialmode.
Digital Material Combinationsofmodelmaterialsfabricatedintheprinterfrom
thebasicmodelmaterialsinstalled.
Digital Material Mode Theprintermodeusedtoprintajobusingtwodifferentmodel
materials.(Thismodecanalsobeusedtoeliminatetheneedfor
performingtheMaterialReplacementprocedurewhenprinting
withasinglemodelmaterial.)
GrabCAD Print Asoftwareapplicationforpreparingprintjobsonavarietyof
3Dprinters,includingtheStratasysObjet1000Plusprinter.
host/server workstation TheworkstationthatinterfacesdirectlywiththeObjet1000
Plusprinterandistypicallypositionednexttoit.
Job Manager ThepartofObjetStudiosoftwarethatmanagesproductionjobs
beforetheyaresenttothePolyJetprinter.
Mixed part Modelswhosepartsareprintedusingmorethanonemodel
material.
Mixed tray Abuildtraycontainingobjects,eachofwhichisdesignedtobe
printedusingadifferentmodelmaterial.
Model material Materialusedforbuildingmodels.

Objet Studio™ Asoftwareapplicationthatpreparesfilesforprintingon
StratasysPolyJetprinters.
OBJDF Theextensionofafilethatcontainsinformationaboutthe
geometryofanobjectandthematerialsrequiredtoprintit.
objdffilesarecreatedinObjetStudio.
OBJTF Theextensionofafilethatcontainsalloftheinformation
neededforamodel-printingjobonPolyJet3Dprinters.An
objtffileisusedbyObjetStudiotosendaprintjobtoaPolyJet
3Dprinter.
OBJZF Theextensionofacompressed“wrapper”filecontainingallof
thefilesusedinanObjetStudiobuildtray.Usingobjzffiles,a
printingjobcanbesavedasasinglefile,forconvenientstorage
andtransfer.
