Stratasys Objet1000 Plus - For more Information

Objet1000 Plus User Guide 1 About This Guide
DOC-06810 Rev.B 1-2
Using This Guide
Thisuserguideprovidesinstructionsforinstalling,operatingandmaintaining
Objet1000Plus3Dprintingsystems.Itexplainshowtousefeatures,and
providespracticalexamplestoguideyouasyouusethesystem.
ThetextandfiguresinthisguidearebasedontheObjet1000Plus3Dprinter,
softwareversion100.3.0andObjetStudiosoftwareversion9.2.
Thisguideassumesthat—
•allthehardware,software,andnetworkcomponentsofyourObjet1000
Plussystemareinstalled,configured,andoperatingcorrectly.
•theoperatorhasaworkingknowledgeoftheWindows
®
PCplatform.
For More Information
Visitwww.stratasys.comtodownloadadditionaldocumentsforthisprinter,
includingdocumentsinotherlanguages.Alsoavailableonthissite:details
aboutconsumablesandsupportcontacts.
Ifyouhaveanyquestionsorcommentsaboutthewayinformationis
presentedinthisdocument,orifyouhaveanysuggestionsforfutureeditions,
pleasesendamessagetoc-support@stratasys.com.