Stratasys Objet1000 Plus - Setting User Preferences

Objet1000 Plus User Guide 5 Using Objet Studio
DOC-06810 Rev.B 5-68
Setting User
Preferences
YoucanchangeseveralObjetStudiosettingsthataffectobjectsplacedonthe
buildtray.
Tochangedefaultsettings:
➢ FromtheObjetStudioCommandsmenu ,selectUserPreferences.
Figure5-89Settingworkpreferences
•BuildingStyle—see"SurfaceFinish"onpage5-21.
•GridStyle—see"ChoosingtheSupportStrength"onpage5-58.
•ApplicationSettings:
❒ LockOrientation—see"FreezingModelOrientation"onpage5-41.
❒ Hollow—see"Hollow"—FillingModelswithSupportMaterialon
page5-59.