Stratasys Objet1000 Plus - Printing from the Jobs Queue; Additional Server Features

Objet1000 Plus User Guide 5 Using Objet Studio
DOC-06810 Rev.B 5-81
Figure5-109Eventselectionforalerts
4. IntheReports Eventsdialogbox,selectthealerteventsandclickOK.
5. IntheNotificationsdialogbox,clickOK.
Printing from
the Jobs
Queue
IfthereisajobintheJobsQueue,itissentautomaticallytotheStratasys
PolyJetprinter—aslongasitison,thereisaconnectiontotheprinter,and
theprinterisonline.
Chapter6describesstartingandoperatingtheprinter.
Additional
Server
Features
ObjetStudioontheprinterserverincludesthefollowingadditionalfeatures:
•"ExtendedTrayPreview"
•"EditingJobs"
•"RestartingJobs"
•"ResumingJobs"
•"SchedulingJobs"
•"ExportingJobs(objzf)"
•"ModifyingtheJobManagerScreen"
Thesefeaturesaredescribedbelow.
ExtendedTrayPreview
Inthiswindow,youcanviewthetrayfromdifferentanglesand
magnificationswithoutleavingtheJob Managerscreen.Inadditionto
displayingtheselectedjobintheTray Previewpane,youcanopenan
enlargedbuildtraywindow.
Todisplaythebuildtraywindow:
1. SelectajobintheJobs QueueortheHistorylist.