Stratasys Objet1000 Plus - Page 118

Objet1000 Plus User Guide 5 Using Objet Studio
DOC-06810 Rev.B 5-83
EditingJobs
YoucanopenjobsintheJobs Queueforediting.
Toeditajob:
1. Selectthejob.
2. ClicktheEdit icon .
TheTray Settings screenopens,displayingthebuildtray.Thestatusof
thejobintheJob Managerscreenchangesto“Editing.”
3. Editthejob.
4. OntheTray Settings ribbon,click .
ThestatusofthejobintheJob Managerscreenchangesbackto
“Waiting.”
RestartingJobs
YoucanrestartjobsfromtheJobs QueueandtheHistorylist.
Torestartajob:
1. Selectthejob.
2. ClicktheRestarticon .
Thejobstatuschangesto“Waiting”(intheJobs Queue).
ResumingJobs
Iftheprintingprocessisstoppedorinterrupted,youmaybeabletocontinue
printingthejobfromthepointwhereprintingstopped.
Whenresumingaprintjob,theprintertraydoesnotmove.Theprinter
expectsObjetStudiotosendtheslicefromwherethestoppageorfailure
occurred.
Toresumeprinting:
1. Selectthejob.
2. Click .