Stratasys Objet1000 Plus - Disposal; Work Environment

Objet1000 Plus User Guide 3 Introducing the Objet1000 Plus 3D Printing System
DOC-06810 Rev.B 3-6
Safety
Considerations
Beforebeingcured,resinsarehazardousmaterials.Topreventpossiblehealth
hazards,followtheseprecautionsregardingprintingmaterials:
•Donotexposetoflames,heatorsparks.
•Preventcontactwithskinandeyes.
•Ventilateareaswheretheyarehandled.
•Keepthemseparatefromfoodanddrink.
Curedplasticparts,however,aresafe.Theycanbehandledandstored
withoutprecautions.
Youcanfindmoresafetyinformationaboutresinsin:
l "SafetyGuidelines"onpage2-5
l "FirstAidforWorkingwithPrintingMaterials"onpage2-8
Disposal
Disposeofcontainersofmodelandsupportmaterialinaccordancewithall
applicablelawsandregulations.
Work Environment
Extremeheatandhumidityconditionscanadverselyaffecttheoperationof
theObjet1000Plus3Dprinter.Useventilationorair-conditioningsystems,if
necessary,tokeeptheworkareawithinthefollowingranges:
•18°–25°C(64°–77°F)
•30%–70%relativehumidity