Stratasys Objet1000 Plus - Professional Mode Features

Objet1000 Plus User Guide 5 Using Objet Studio
DOC-06810 Rev.B 5-69
Professional Mode Features
SomeadvancedfeaturesofObjetStudioareonlyaccessibleinProfessional
Mode.
ToseethecurrentObjetStudiosetting:
➢ OpentheToolsmenu.
Figure5-90Toolsmenu,showingProfessional Modeselected
IfProfessional Mode isselected,advancedfeaturesaredisplayed.
TochangetheProfessional Mode setting:
1. FromtheToolsmenu,selectProfessionalMode.
Thefollowingmessageisdisplayed,remindingyouthatthechangewill
onlytakeeffectthenext timeyouopenObjetStudio—eventhoughthe
checkmarknexttotheProfessional Mode optionappearsimmediately.
Figure5-91Configuration-changemessage
2. Closeandre-openObjetStudiotousetheProfessionalModefeatures.