Stratasys Objet1000 Plus - Ribbon Commands

Objet1000 Plus User Guide 5 Using Objet Studio
DOC-06810 Rev.B 5-7
Ribbon
Commands
ThefollowingtableliststheTray SettingsandModel Settingsribbon
commandgroups,andshowswhentheyareenabled,andwheretheyappear.

Group Purpose When enabled Tray
Settings
Ribbon
Model
Settings
Ribbon
Settingdisplaycolors. Always.  
Selectingperspective
andzoomlevel.
Modelsareon
thebuildtray.

 
Choosetoselectaplane,
elements,orelement
groups(assemblies).
Modelsareon
thebuildtray.

 
Changetheperspective
oftheactivepane.
Modelsareon
thebuildtray.




Assigningprinting
material(s).
Buildtrayis
empty.
Modelsarenot
selected.

 
Undoingorredoing
actions.
Afteranactionor
objectselection.
 
Openingandsavingfiles. Modelsarenot
selected.
 
Placingmodelfilesonthe
buildtray.
Always. 


Pre-build/build
commands.
Modelsareon
thebuildtray.



