Stratasys Objet1000 Plus - E-Mailing Objet Digital Files; Printing the Tray

Objet1000 Plus User Guide 5 Using Objet Studio
DOC-06810 Rev.B 5-53
E-mailing
Objet Digital
Files
Youcaneasilye-mailobjdffilesusingMicrosoft
®
OfficeOutlook
®
.Sending
objdffilesisrecommended(insteadofstlfiles)becausethesizeofafileis
typicallyreducedbymorethanhalf.Anaddedbenefitisthattheobjdffile
containsthemodel-materialinformationfortheobject.
Toe-mailafile:
1. FromtheToolsmenu,selectEmailObjetDigitalFile.
OutlookopenswiththefileattachedandSubjectdetailsaddedtothe
e-mailform.
2. Enterthee-mailaddressandsendthefile.
Printing the
Tray
Whenatrayisreadytobeprinted,itisplacedintheJobsQueue.Whenthe
jobreachestheheadofthequeue,ObjetStudiopre-processesthetrayfileto
createslices,andfeedsthemtotheprinter.
Tosendthetraytotheprintqueue:
1. OntheTray Settingsribbon,Build Process group,click .
❒ Ifprintingthetrayrequirestwomodelmaterials(DigitalMaterial
mode),theJob Summarydialogboxopens.
Figure5-70 JobSummarywhenprintingwithmultiplemodelmaterials
Note: Thevaluesdisplayedaretheresultofaquickcalculation,and
representaroughestimateofthematerialsandtimeinputrequiredtoprint
thejob.Foramoreaccuratecalculation,clickFineEstimation.
Continue with step 4on page 5-56.