Stratasys Objet1000 Plus - Page 91

Objet1000 Plus User Guide 5 Using Objet Studio
DOC-06810 Rev.B 5-56
4. ClickBuild.
Ifthebuildtrayfilehasnotbeensaved,theSave Asdialogboxopensfor
youtosaveitnow.
ObjetStudiochecksifthereisaproblemwiththepositioningofobjects
onthetray.Ifso,theaffectedobjectsaredisplayedwithspecialcolors(see
"TrayValidation"onpage5-50),andawarningmessageappears.
Figure5-73Trayvalidationwarningmessage
❒ TocanceltheBuildcommandsoyoucancorrecttheproblem,click
No.
❒ Toprintthemodelsastheyarepositionedonthetray,clickYes.
TheJob Managerscreenopens,soyoucanmonitortheprogressofyour
trays—before,during,andafterprinting.See"MonitoringandManaging
PrintJobs"onpage5-75.