Stratasys Objet1000 Plus - Page 140

Objet1000 Plus User Guide 6 Operating and Maintaining the Objet1000 Plus 3DPrinter
DOC-06810 Rev.B 6-20
3. Selecttheoptioncorrespondingtothelengthoftimethattheprinterwill
notbeused—lessormorethantendays.
Note: BeforeselectingMore than 10 days,makesurethatcleaning-fluid
cartridgesareavailable.
Figure6-17Shutdownoptions
4. Inthenextscreen,verifythatthetrayisemptyandclickNext.
Theshutdownprocedurebegins.
Figure6-18Shutdownprogress