Stratasys Objet1000 Plus - Page 145

Objet1000 Plus User Guide 6 Operating and Maintaining the Objet1000 Plus 3DPrinter
DOC-06810 Rev.B 6-25
Figure6-21SelectingPatternTest
5. ClickYesintheConfirmdialogboxtobegin.
Figure6-22PatternTestconfirmation
6. Ifthebuildtrayisnotclear,clickNointhefollowingdialogbox.
Figure6-23Buildtray(Z)leveladjustment
Thislowersthebuildtray,sothatmodelsonthetrayarenotdamaged.