Summa S3 Series - Page 67

S Class 3 User’s Manual
Basic operation 2-17
7. After having set the parameters scroll to the bottom of the FlexCut parameters to set panel size.
8. Tap FlexCut panel size.
9. Use the arrow keys or the
numbers to change the
value.
10. Tap to confirm.
NOTE: The above procedure must be performed, even if your software can
activate FlexCut. It is also recommended to set the FlexCut parameters on the
cutter and not in the cutting software.
NOTE: Recommended settings for FlexCut panel size: 3-10 cm.
FlexCut
FlexCut panel size
FlexCut panel size