Power Unit Mechanical: 1D-12
7) Disconnect ignition coil connectors (4).
Remove the bolts securing the ignition coils (5).
Remove all ignition coils and spark plugs.
8) Remove the cylinder head cover (6).
Refer to “Cylinder Head Cover Removal and
Installation” (Page 1D-2).
9) Remove the electric parts holder (7).
Refer to “Electric Parts Holder Removal and
Installation” (Page 1D-5).
10) Remove the starter motor (8).
Refer to “Starter Motor Removal and Installation” in
Section 1I (Page 1I-4).
11) Remove the flywheel (9).
Refer to “Flywheel Removal and Installation” in
Section 1K (Page 1K-5).
Special tool
: 09930–48720 (Flywheel holder)
: 09930–39411 (Flywheel remover)
: 09930–39420 (Flywheel remover bolts)
12) Remove the battery charge coil (10).
Refer to “Battery Charge Coil Removal and
Installation” in Section 1K (Page 1K-6).
I9J011140130-01
I9J011140131-01
I9J011140132-01
I9J011140133-01
I9J011140134-01
I9J011140135-01
To Next Page
Loading...
