ROUTER COMMANDS
862
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
asprepend Specifies the number of times that this router will prepend its
AS to the ASPATH when sending routes
OPTIONAL
holdtime Specifies the holdtime value used when negotiating a
peering session. Default is 180 seconds.
OPTIONAL
keepalivetime Sets the keep-alive timer value. Defaults to 1/3 of holdtime OPTIONAL
maxroutes Specifies the maximum number of routes BGP will accept
from this peer for installation in the BGP-RIB.
OPTIONAL
outdelay Specifies the time a route must be present in the RIB before
it is exported into BGP
OPTIONAL
rrcap Enable/Disable the ability of using the route refresh
message
OPTIONAL
dynamiccap Enable/Disable the abiltiy of using the dynamic capability
message
OPTIONAL
grrestartcap Enable/Disable the ability to support the gracefull restart
functionality of a receiving speaker
OPTIONAL
passive Specifies wether this BGP speaker will initiate a BGP session
or not
OPTIONAL
multihop Specifies wether this EBGP speaker is onlink or not OPTIONAL
To Next Page
Loading...
Need help?
General
