If you will connect your system to the CMS (Central Monitoring Station), you should
enter the CMS phone number and account number. You can describe two different
account numbers for connecting to two different CMS.
3. For entering The Account Number. (Example: Account #1 9876)
On VPC 116/132 LED keypad
After you pressed "0401", press "9876" and then "√" button.
*If Account #2 exists, follow and do the same steps using "0402" address on
LED keypad or "…→02-CMS ACCNT NO" menu on LCD keypad.
On LCD keypad (By using up and down arrow keys)
Enter BASIC SETTINGS"√"→CMS ACCOUNTS"√"→01-CMS ACCNT NO,
press "9876" and then "√" button.
*If Account #2 exists, follow and do the same steps using "0402" address on
LED keypad or "…→02-CMS ACCNT NO" menu on LCD keypad.
4. For entering Central Monitoring Station Phone Number.(Example:0216 123 45 67)
On VPC 116/132 LED keypad
After you pressed "0501", press "02161234567" and then "√" button.
* If you will get dial tone with "9" while entering phone numbers, please press
"9" then press "0" long to get dial tone and press "02161234567" and then "√".
* If the CMS has a second phone number for the same account, follow and do
the same steps using "0503" address on LED keypad or "…→03-CMS PHONE
NR" menu on LCD keypad
* If you want to enter 2.CMS’s phone numbers, please follow and do the same
steps using "0502" address for the 1. phone number and "0504" address for the
second phone number on LED keypad or "…→02-CMS PHONE NR" menu for
the 1. phone number and "…→04-CMS PHONE NR" menu for the 2. phone
number on LCD keypad.
On LCD keypad (By using up and down arrow keys)
Enter BASIC SETTINGS"√"→CMS PHONES"√"→01-CMS PHONE NR, press
"02161234567" and then "√" button.
* If you will get dial tone with "9" while entering phone numbers, please press
"9" then press "0" long to get dial tone and press "02161234567" and then "√".
* If the CMS has a second phone number for the same account, follow and do
the same steps using "0503" address on LED keypad or "…→03-CMS PHONE
NR" menu on LCD keypad
* If you want to enter 2.CMS’s phone numbers, please follow and do the same
steps using "0502" address for the 1. phone number and "0504" address for the
second phone number on LED keypad or "…→02-CMS PHONE NR" menu for
the 1. phone number and "…→04-CMS PHONE NR" menu for the 2. phone
number on LCD keypad.
Note: When the phone number of Central Monitoring Station is entered, the
communicator will be activated automatically.
In order to inform the users in case of the alarm situation by telephone, up to 8 user
phone numbers can be entered.
5. For entering User Phone Number. (Example: Tel #1 0532 123 45 67)
On VPC 116/132 LED keypad
After you pressed "0601", press "05321234567" and then "√" button.
* For entering other user phone number, follow and do the same steps using
"0602"..."0608" addresses on LED keypad or "...→02-PERSON PHONE NR"...
"...→08-PERSON PHONE NR" menu on LCD keypad.
To Next Page
Loading...
