Telit Wireless Solutions ME310G1 - Page 365

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 365 of 1039 2021-09-23
Not Subject to NDA
7
:
Steering of Roaming
8
:
Steering of Roaming WLAN
<cmdType>=5 (SET UP EVENT LIST proactive command)
#STGI response format:
#STGI: 5,<eventListMask>
Name
Type
Default
Description
<eventListMask>
hex
N/A
identifies the list of events to
monitor.
The <eventListMask> (two bytes
long) is a bit mask where each
bit, when set, indicates that the
corresponding event must be
monitored (e.g. if
<eventListMask> is 0x0001, it
means that MT call must be
monitored).
33. bit 0 = MT call
34. bit 1 = Call connected
35. bit 2 = Call disconnected
36. bit 3 = Location status
37. bit 4 = User activity
38. bit 5 = Idle screen
available
39. bit 6 = Card reader status
(if class "a" is supported)
40. bit 7 = Language selection
41. bit 8 = Browser
Termination (if class "c" is
supported)
42. bit 9 = Data available (if
class "e" is supported)
43. bit 10 = Channel status (if
class "e" is supported)
44. bits 11 - 15 = reserved for
future use