Telit Wireless Solutions ME310G1 - Page 366

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 366 of 1039 2021-09-23
Not Subject to NDA
Value:
0x0001÷0x01FF
:
mask
<cmdType>=16 (SET UP CALL proactive command)
#STGI response format:
#STGI: 16,<cmdDetails>,[<confirmationText>],<calledNumber>
Name
Type
Default
Description
<cmdDetails>
integer
N/A
identifies the command
details
Values:
0
:
set up call, but only if not currently
busy on another call
1
:
set up call, but only if not currently
busy on another call, with redial
2
:
set up call, putting all other calls (if
any) on hold
3
:
set up call, putting all other calls (if
any) on hold, with redial
4
:
set up call, disconnecting all other calls
(if any)
5
:
set up call, disconnecting all other calls
(if any), with redial
<confirmationText>
string
-
string for user
confirmation stage
<calledNumber>
string
-
string containing called
numbers
This section is dedicated to the following proactive commands: