Telit Wireless Solutions ME310G1 - Page 821

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 821 of 1039 2021-09-23
Not Subject to NDA
format to identify different cipher
suites.
The cipher suites identified by
<CipherSuite> parameters
expressed in decimal format are
listed in the Value section right
below.
The cipher suites identified by RCF
values expressed in hex format are
listed in the #SSLSECCFG
command.
Values:
0
:
Chiper Suite is chosen by remote Server
1
:
TLS_RSA_WITH_RC4_128_MD5, not available
because obsolete
2
:
TLS_RSA_WITH_RC4_128_SHA, not available
because obsolete
3
:
TLS_RSA_WITH_AES_256_CBC_SHA, not
available because obsolete
4
:
TLS_RSA_WITH_AES_128_CBC_SHA, not
available because obsolete
5
:
TLS_RSA_WITH_AES_256_CBC_SHA
6
:
TLS_RSA_WITH_3DES_EDE_CBC_SHA, not
available because obsolete
7
:
TLS_DHE_RSA_WITH_AES_128_CBC_SHA
8
:
TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA,
not available because obsolete
9
:
TLS_DHE_RSA_WITH_AES_256_CBC_SHA
10
:
TLS_RSA_WITH_AES_128_CBC_SHA256