Telit Wireless Solutions ME310G1 - Page 822

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 822 of 1039 2021-09-23
Not Subject to NDA
11
:
TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
12
:
TLS_RSA_WITH_AES_256_CBC_SHA256
13
:
TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
<ConnectionStatus>
integer
N/A
Connection Status identifier
Values:
0
:
socket disabled
1
:
connection closed
2
:
connection open
This command can be issued even if the <SSId> is not enabled.
For <CipherSuite> values expressed in hex format, refer to #SSLSECCFG
command
AT#SSLS=?
Test command returns the ranges of the parameters values in format:
#SSLS: (1)
•
AT#SSLS=1
#SSLS: 1,1
OK
•
AT#SSLS=1
#SSLS: 1,2,0
OK