Telit Wireless Solutions ME310G1 - Page 978

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 978 of 1039 2021-09-23
Not Subject to NDA
<cog>
string
-
Course over Ground (degrees,
True) (referred to RMC sentence)
<spkm>
string
-
speed over ground (km/h)
(referred to VTG sentence)
<spkn>
string
-
speed over ground (knots)
(referred to VTG sentence)
<mode>
string
-
Mode Indicator: six characters
that indicate the operating mode
of the six constellations GPS,
GLONASS, Galileo, BDS, QZSS,
NavIC (Not supported).
The characters shall take one of
the following values:
A = Autonomous.
D = Differential.
E = Estimated (dead reckoning)
Mode.
F = Float RTK.
M = Manual Input Mode.
N = No fix.
P = Precise.
R = Real Time Kinematic.
S = Simulator Mode.
(referred to GNGNS sentence)
<nsat>
integer
-
total number of satellites in use
(referred to GNS sentence)
AT$GNSSACP?
Read command has the same behavior as the Execution command.
AT$GNSSACP=?
Test command returns the OK result code.