Telit Wireless Solutions ME310G1 - Page 979

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 979 of 1039 2021-09-23
Not Subject to NDA
AT$GPSP?
$GPSP: 0
When the module is down there is no acquired position:
AT$GNSSACP
$GNSSACP: ,,,,,,,0,,,,,
OK
AT$GPSP=1
OK
Until first fix is received the command will display this:
AT$GNSSACP
$GNSSACP: ,,,,,,,1,,,,,
Once fix has been received the command will display actual GNSS time and
position:
OK
AT$GNSSACP
$GNSSACP:
132807.000,130521,3913.6929N,00904.1545E,8.2,0.8,0.8,3,0.0,0.0,0.0,AANNNN,14
OK