Telit Wireless Solutions ME910G1 - AT+ICF - DTE-Modem Character Framing

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 105 of 545 2020-04-15
3.1.4.11. AT+ICF - DTE-Modem Character Framing
This set command defines the asynchronous character framing.
ITU-T Recommendation V.25 ter
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT+ICF=<format>[,<parity>]
Parameters:
Name
Type
Default
Description
<format>
string
3
sets the number of Data bits and Stop bits. Only the
<format>=3 is supported.
Value:
3
:
8 Data, 1 Stop
<parity>
string
0
setting this sub parameter has no meaning.
Values:
0
:
odd, not supported
1
:
even, not supported
AT+ICF?
Read command returns current settings for parameters <format> and <parity>. The setting of
parameter <parity> is always 0.
AT+ICF=?
Test command returns the ranges of values for the parameters <format> and <parity>.
AT+ICF=3
OK
AT+ICF=?
+ICF: (3),(0,1)
OK