Telit Wireless Solutions ME910G1 - AT+CSVM - Set Voice Mail Number

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 57 of 545 2020-04-15
3.1.2.28. AT+CSVM - Set Voice Mail Number
Command to set voice mail server number.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Specific profile
No
-
2
AT+CSVM=<mode>[,<number>[,<type>]]
Set command is dummy. It only checks for parameters values validity; it does not send any actual
write request to SIM to update voice mail number, nor sends any request to network to
enable/disable voice mail.
Parameters:
Name
Type
Default
Description
<mode>
integer
1
enable/disable voice mail number
Values:
0
:
disable the voice mail number
1
:
enable the voice mail number
<number>
string
-
string type phone number of format specified by <type>
<type>
integer
129
type of address octet in integer format
Values:
129
:
unknown type of number and ISDN/Telephony numbering plan
145
:
international type of number and ISDN/Telephony numbering plan
(contains the character "+")
AT+CSVM?
Read command returns the currently selected voice mail number and the status (i.e.
enabled/disabled) in the format
+CSVM:<mode>,<number>,<type>
AT+CSVM=?
Test command reports the range for the parameters <mode> and <type>.