Telit Wireless Solutions ME910G1 - AT#ST - Socket Type

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 398 of 545 2020-04-15
3.13.23. AT#ST - Socket Type
Socket Type
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#ST[=<connId>]
Set command reports the current type of the socket (TCP/UDP) and its direction (Dialer/Listener)
Parameter:
Name
Type
Default
Description
<connId>
integer
N/A
socket connection identifier
Value:
1÷conMAX
:
socket connection identifier. conMax value is returned by test
command
Additional info:
The response format is:
#ST: <connId>,<type>,<direction>
Name
Type
Default
Description
<type>
integer
N/A
socket type
Values:
0
:
No socket
1
:
TCP socket
2
:
UDP socket
<direction>
integer
N/A
direction of the socket
Values:
0
:
None
1
:
Dialer
2
:
Listener
Issuing #ST command without <connId> socket identifier, it returns information about type
of all sockets. For each socket, the format of the returned message is:
#ST: <connId
n
>,<type
n
>,<direction
n
><CR><LF>