EasyManua.ls Logo

Telit Wireless Solutions ME910G1 - Sim; AT+CPIN - Enter the PIN

Telit Wireless Solutions ME910G1
545 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 171 of 545 2020-04-15
SIM
3.3.1. AT+CPIN - Enter the PIN
The command sends to the device a password which is necessary before it can be operated.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Other
No
-
2
AT+CPIN=<pin>[,<newpin>]
Set command sends to the device a password which is necessary before it can be operated (SIM
PIN, SIM PUK, PH-SIM PIN, etc.).
If the PIN required is SIM PUK or SIM PUK2, the <newpin> is required. This <newpin>, will
replace the old pin in the SIM.
The command may be used to change the SIM PIN by sending it with both parameters <pin> and
<newpin>.
Parameters:
Name
Type
Default
Description
<pin>
string
-
PIN required or old PIN if the command is used to change the
SIM PIN
<newpin>
string
-
new PIN that will replace old pin
AT+CPIN?
Read command reports the PIN/PUK/PUK2 request status of the device in the form:
+CPIN: <code>
Additional info:
Parameters:
Name
Type
Default
Description
<code>
string
N/A
PIN/PUK/PUK2 request status
code
Values:
READY
:
ME is not pending for any password
SIM PIN
:
ME is waiting SIM PIN to be given
SIM PUK
:
ME is waiting SIM PUK to be given
PH-SIM PIN
:
ME is waiting phone-to-SIM card password to be
given

Table of Contents

Other manuals for Telit Wireless Solutions ME910G1

Related product manuals