EasyManua.ls Logo

Telit Wireless Solutions ME910G1 - ATS4 - Response Formatting Character

Telit Wireless Solutions ME910G1
545 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 86 of 545 2020-04-15
3.1.3.5. ATS4 - Response Formatting Character
The command manages the character generated by the device as part of the header, trailer, and terminator for
result codes and information text.
ITU-T Recommendation V.25 ter
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
ATS4=[<char>]
Set command sets the value of the character generated by the device as part of the header, trailer,
and terminator for result codes and information text, along with the S3 parameter.
Parameter:
Name
Type
Default
Description
<char>
integer
10
response formatting character (decimal ASCII)
Value:
0÷127
:
response formatting character
If the value of S4 is changed in a command line the result code issued in response of that
command line will use the new value of S4.
ATS4?
Read command returns the current value of S4 parameter.
The format of the numbers in output is always 3 digits, left-filled with 0s.

Table of Contents

Other manuals for Telit Wireless Solutions ME910G1

Related product manuals