Telit Wireless Solutions ME910G1 - HW and Radio Control; AT#CBC - Battery and Charger Status

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 291 of 545 2020-04-15
HW and Radio Control
3.8.1. AT#CBC - Battery and Charger Status
This command returns the current Battery and Charger state.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#CBC
Execution command returns the current Battery and Charger state. The response is in the format:
#CBC: <ChargerState>,<BatteryVoltage>
Additional info:
The response has its fields described below.
Name
Type
Default
Description
<ChargerState>
integer
0
Battery charger state
Values:
0
:
charger not connected
1
:
charger connected and charging
2
:
charger connected and charge completed
<BatteryVoltage>
integer
-
battery voltage in units of 10 mV: it is the
real battery voltage only if charger is not
connected; if the charger is connected this
value depends on the charger voltage
AT#CBC=?
Test command returns the OK result code.