Telit Wireless Solutions ME910G1 - AT#SLEDSAV - Save STATLED GPIO Setting

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 299 of 545 2020-04-15
3.8.5. AT#SLEDSAV - Save STAT_LED GPIO Setting
This command allows to save the current STAT_LED GPIO setting.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#SLEDSAV
Execution command saves the STAT_LED GPIO setting in NVM.
AT#SLEDSAV=?
Test command returns OK result code.