Telit Wireless Solutions ME910G1 - Network; AT+CNUM - Subscriber Number

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 113 of 545 2020-04-15
Network
3.2.1. AT+CNUM - Subscriber Number
Execution command returns the MSISDN (if the phone number of the device has been stored in the SIM card)
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+CNUM
Execution command returns the MSISDN (if the phone number of the device has been stored in
the SIM card) using the following format:
+CNUM: <alpha>,<number>,<type>[<CR><LF>
+CNUM: <alpha>,<number>,<type>[...]]
The parameters are described in the Additional info section.
Additional info:
List of the parameters meaning.
Name
Type
Default
Description
<alpha>
string
-
alphanumeric string associated to <number>; the
character set depends on the value set with
+CSCS.
<number>
string
-
numeric string containing the phone number in the
format <type>.
<type>
integer
N/A
type of number.
Values:
129
:
national numbering scheme
145
:
international numbering scheme (contains the character "+")
AT+CNUM=?
Test command returns the OK result code.