EasyManua.ls Logo

Telit Wireless Solutions ME910G1 - AT+IMEISV - Request IMEI and Software Version

Telit Wireless Solutions ME910G1
545 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 76 of 545 2020-04-15
3.1.2.43. AT+IMEISV - Request IMEI and Software Version
Execution command returns the International Mobile Station Equipment Identity and Software Version Number
(IMEISV) of the module without +IMEISV: command echo.
3GPP TS 23.003
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT+IMEISV
The command returns the following massage:
AT+IMEISV
<IMEISV>
OK
Additional info:
The IMEISV is composed of the following elements (each element shall consist of
decimal digits only):
Type Allocation Code (TAC). Its length is 8 digits
Serial Number (SNR) is an individual serial number uniquely identifying each
equipment within each TAC. Its length is 6 digits
Software Version Number (SVN) identifies the software version number of the
mobile equipment. Its length is 2 digits
AT+IMEISV=?
Test command returns OK result code.

Table of Contents

Other manuals for Telit Wireless Solutions ME910G1

Related product manuals