Telit Wireless Solutions ME910G1 - AT#CPBGR - Read Group Entries

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 267 of 545 2020-04-15
3.6.5. AT#CPBGR - Read Group Entries
This command returns Grouping information Alpha String (GAS) USIM file entries.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#CPBGR=<indexFirst>[,<indexLast>]
Set command returns Grouping information Alpha String (GAS) USIM file entries in location number
range <indexFirst>...<indexLast>. If <indexLast> is omitted, only location <indexFirst> is
returned. The response, for each location, is a string. This string is a name used for a group the
ADN entries can belong to.
The response format is:
[#CPBGR: <index1>,<text1>[<CR><LF>
#CPBGR: <index2>,<text2>[…]]]
Parameters:
Name
Type
Default
Description
<indexFirst>
integer
NA
first location to be read
Value:
minIndex÷maxIndex
:
range of location numbers of GAS, where
"minIndex" and "maxIndex" can be obtained by
issuing the test command
<indexLast>
integer
NA
last location to be read
Value:
minIndex÷maxIndex
:
range of location numbers of GAS, where
"minIndex" and "maxIndex" can be obtained by
issuing the test command
Additional info:
Response parameters:
Name
Type
Default
Description
<index>
integer
N/A
location number of the GAS entry
Value:
indexFirst÷indexLast
:
range of location numbers of GAS returned in
the response
<text>
string
-
alphanumeric text associated to the entry
AT#CPBGR=?
Test command returns the supported values of the parameters <index
n
> and the maximum length
of <text
n
> field, in the format: