Telit Wireless Solutions ME910G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 281 of 545 2020-04-15
3.7.6. AT+CTZU - Automatic Time Zone Update
Set command enables/disables the automatic time zone update via NITZ.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Specific profile
No
-
2
AT+CTZU=<onoff>
Parameter:
Name
Type
Default
Description
<onoff>
integer
0
enables/disables the automatic time zone update via NITZ
Values:
0
:
disable
1
:
enable
The command +CTZU is the ETSI standard equivalent of Telit custom command #NITZ
(for the date and time update functionality).
Despite of the name, the command +CTZU enables automatic update of the date and
time set by +CCLK command (not only time zone). This happens when a Network Identity
and Time Zone (NITZ) message is sent by the network.
If the automatic date and time update functionality has been enabled by +CTZU or #NITZ
(or both), NITZ message will cause a date and time update.
AT+CTZU?
Read command reports the current setting of <onoff> in the format:
+CTZU: <onoff>
AT+CTZU=?
Test command returns the supported values of parameter <onoff>.

Telit Wireless Solutions ME910G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ME910G1
Category	Wireless modules
Language	English