Telit Wireless Solutions ME910G1 - S Parameters; ATS0 - Number of Rings to Auto Answer

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 82 of 545 2020-04-15
3.1.3. S Parameters
3.1.3.1. ATS0 - Number of Rings to Auto Answer
The command controls the automatic answering feature of the DCE.
ITU-T Recommendation V.25 ter
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
ATS0=[<n>]
Set command sets the number of rings required before device automatically answers an incoming
call.
Parameter:
Name
Type
Default
Description
<n>
integer
0
Number of rings
Values:
0
:
auto answer disabled
1÷255
:
number of rings required before automatic answer. The DCE answers
when the incoming call indication (ring) has occurred the number of
times indicated by the value.
Data only products ignore command setting and auto answer is disabled if incoming call
is a voice call.
ATS0?
Read command returns the current value of S0 parameter.