Telit Wireless Solutions ME910G1 - ATV - Response Format

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 96 of 545 2020-04-15
3.1.4.3. ATV - Response Format
Set command determines the contents of the header and trailer transmitted with result codes and information
responses. It also determines if result codes are transmitted in a numeric form or an alphanumeric form
(according to [1]).
[1] ITU-T Recommendation V.25 ter
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
ATV[<n>]
Parameter:
Name
Type
Default
Description
<n>
integer
1
format of information responses and result codes. See Additional
info section.
Values:
0
:
limited headers and trailers and numeric format of result codes
1
:
full headers and trailers and verbose format of result codes
Additional info:
<n>=0
information responses
<text><CR><LF>
result codes
<numericCode><CR>
<n>=1
information responses
<CR><LF>
<text><CR><LF>
result codes
<CR><LF>
<verboseCode><CR><LF>
the <text> portion of information responses is not affected by this setting.
if parameter is omitted, the command has the same behavior of ATV0