Telit Wireless Solutions ME910G1 - AT#PLMNMODE - PLMN List Selection

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 131 of 545 2020-04-15
3.2.13. AT#PLMNMODE - PLMN List Selection
Set command is used to select the list of operator names to be used in +COPN command, and in internal
researches for operator name matching given MCC and MNC.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#PLMNMODE=<mode>
Parameter:
Name
Type
Default
Description
<mode>
integer
1
list of operator names to be used for internal search
Values:
1
:
internal hard coded list
2
:
list is retrieved from a file in the file system
AT#PLMNMODE?
Read command reports whether the currently used list of PLMN names is fixed or not, in the format:
#PLMNMODE: <mode>
AT#PLMNMODE=?
Test command returns the supported range of values for parameter <mode>.