Telit Wireless Solutions ME910G1 - AT#WS46 - Select Iot Technology

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 155 of 545 2020-04-15
3.2.27. AT#WS46 - Select IoT Technology
This command selects the IoT technology.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#WS46=[<n>]
Set command selects the IoT technology to operate with.
Parameter:
Name
Type
Default
Description
<n>
integer
-
select the technology to be used.
The default value depends on the LTE tecnology supported by the
module
LTE technology supported
<n> value
CAT-M1
0
NB-IoT
1
CAT-M1 (preferred) and NB-IoT
2
CAT-M1 and NB-IoT (preferred)
3
The command takes effect after the module reboot.
AT#WS46?
Read command reports the currently selected technology, in the format:
#WS46: <n>
AT#WS46=?
Test command reports the range for the parameter <n>.