EasyManua.ls Logo

Telit Wireless Solutions ME910G1 - AT#PADCMD - PAD Command Features

Telit Wireless Solutions ME910G1
545 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 400 of 545 2020-04-15
3.13.24. AT#PADCMD - PAD Command Features
This command sets features of the pending data flush to socket, opened with #SD command.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#PADCMD=<mode>
Set command for features of the pending data flush to socket, opened with #SD command.
Parameter:
Name
Type
Default
Description
<mode>
integer
N/A
enable/disable forwarding
Values:
0
:
Bit 1: disable forwarding
1
:
Bit 1: enable forwarding
Forwarding depends on character defined by #PADFWD.
Other bits are reserved.
AT#PADCMD?
Read command reports the currently selected <mode> in the format:
#PADCMD: mode
AT#PADCMD=?
Test command reports the supported range of values for parameter <mode>.

Table of Contents

Other manuals for Telit Wireless Solutions ME910G1

Related product manuals